Learn more about the characteristics of electronic relays.
· They are used to control conductive liquids in all types of reservoirs, wells, ponds, etc.
· The models differ by combinations of the following characteristics:
· Range of sensitivity.
· Modality of control.
· Quantity and type of output contacts.
· Should be connected to any type of conductive electrode.
· DISIBEINT is not responsible of the behavior of these relays when connected to sensors from other manufacturers.
· They are used to control conductive liquids in all types of reservoirs, wells, ponds, etc.
· The models differ by combinations of the following characteristics:
· Range of sensitivity.
· Modality of control.
· Quantity and type of output contacts.
-Technical data
PNSA - DNSA - SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+ Documentation
PNSA - DNSA - SNSA
· Data sheet
· Data sheet
· Data sheet
· Installation and application tips
· Installation and application tips
· Installation and application tips
· Well level control
· Well level control
· Well level control
· Schema: Well conotrl
· Schema: Well conotrl
· Declaration of conformity CE
· Declaration of conformity CE
· Declaration of conformity CE
· Safety, installation and maintenance instructions
· Safety, installation and maintenance instructions
· Safety, installation and maintenance instructions
+Ordering
· Determine the supply voltage that the relay will be connected to.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units conversor.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
NR 1 1/2
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NR 1 1/2 PG9
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: Cable 3 m
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRI 1 1/2 PG9
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1"1/2 G (PVC)
· Electrical connection: Cable 3 m (PVC)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NR 1 1/2 M12
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2 M12
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRA 1 1/2
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NRA 1 1/2 PG9
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRAI 1 1/2 PG9
· Electrodes isolated with PTFE. It can be used with alimentary products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRA 1 1/2 M12
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2 M12
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NCVS TP PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TC PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVS TC12 PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TP PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TC PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TC12 PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NRX 1
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NRXI 1
· Electrodes isolated with PTFE
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NT
· Electrode for independent level points
· Process connection: Nipple 1/4" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +140 ºC
· Pressure: 5 kg/cm²
NB
· Electrode holder for independent level points
· For tanks with pressure and temperature
· Process connection: Nipple 1/2" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +220 ºC
· Pressure: 20 bar
· The electrodes must be ordered separately (see [Accessories NB] at the end of this section)
NTM PVC
· Electrode for independent level points
· Fast height adjustment
· Process connection: Nipple 1/2", 3/4", 1" G. PVC, PTFE, PVDF
· Electrical connection: Terminal by screw
· Temperature: +60 ºC (PVC) / +140 ºC (PTFE/PVDF)
· Pressure: Atmosférica
· Protection: IP50
NRT2 PG9
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: PVC Cable, 3 meters
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NRT2 TC
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NTBI
· Used in alimentary and pharmacy processes
· Process conn.: Thread 1/4", 1/2", 3/4" or 1" G. SS AISI316 (1.4401)
· Electrical connection: SS connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum 2 electrodes
NTBII
· Used in alimentary and pharmacy processes
· Electrodes isolated with PTFE
· Process conn. Top screw. 1/4", 1/2", 3/4" or 1" G. SS AISI316
· Electrical connection: SS Connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum. 2 electrodes
NCPS TB INOX
· The common electrode is the process connection
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI TB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TB INOX
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TB INOX
· Electrodes isolated with PTFE
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
· Electrodes isolated with Polyolefine PE
· Process connection: Nipple. 1"1/2 G. PVC
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCVSC TB PVC
· Electrode holding: Twisted wire ø3 mm. SS AISI316 (1.4401).
· Process connection: Top screw. 1"1/2 G (PVC)
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCI
· Use in alimentary and pharmacy industries
· Connection to process: Clamp flange. 1". SS AISI316 (1.4401)
· Electrical Connection: Cable silicone
· Temperature: +100 ºC
· Pressure: 1 kg/cm²
· Protection: IP66
· Maximum 2 electrodes
NCPS DB INOX
· The common electrode is the process connection
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protección: IP66
· Maximum 3 electrodes
NCPSI DB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 3 electrodes
NCPS CB INOX
· The common electrode is the process connection
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI CB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS DB INOX
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (a 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI DB INOX
· Electrodes isolated with PTFE
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS CB INOX
· The common electrode is one of the rods
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI CB INOX
· Electrodes isolated with PTFE
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
· They are used to control conductive liquids in all types of reservoirs, wells, ponds, etc.
· The models differ by combinations of the following characteristics:
· Range of sensitivity.
· Modality of control.
· Quantity and type of output contacts.
-Technical data
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+ Documentation
SNDA
· Data sheet
· Installation and application tips
· Safety, installation and maintenance instructions
+Ordering
· Determine the supply voltage that the relay will be connected to.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units conversor.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
NR 1 1/2
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NR 1 1/2 PG9
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: Cable 3 m
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRI 1 1/2 PG9
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1"1/2 G (PVC)
· Electrical connection: Cable 3 m (PVC)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NR 1 1/2 M12
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2 M12
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRA 1 1/2
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NRA 1 1/2 PG9
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRAI 1 1/2 PG9
· Electrodes isolated with PTFE. It can be used with alimentary products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRA 1 1/2 M12
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2 M12
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NCVS TP PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TC PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVS TC12 PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TP PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TC PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TC12 PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NRX 1
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NRXI 1
· Electrodes isolated with PTFE
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NT
· Electrode for independent level points
· Process connection: Nipple 1/4" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +140 ºC
· Pressure: 5 kg/cm²
NB
· Electrode holder for independent level points
· For tanks with pressure and temperature
· Process connection: Nipple 1/2" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +220 ºC
· Pressure: 20 bar
· The electrodes must be ordered separately (see [Accessories NB] at the end of this section)
NTM PVC
· Electrode for independent level points
· Fast height adjustment
· Process connection: Nipple 1/2", 3/4", 1" G. PVC, PTFE, PVDF
· Electrical connection: Terminal by screw
· Temperature: +60 ºC (PVC) / +140 ºC (PTFE/PVDF)
· Pressure: Atmosférica
· Protection: IP50
NRT2 PG9
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: PVC Cable, 3 meters
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NRT2 TC
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NTBI
· Used in alimentary and pharmacy processes
· Process conn.: Thread 1/4", 1/2", 3/4" or 1" G. SS AISI316 (1.4401)
· Electrical connection: SS connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum 2 electrodes
NTBII
· Used in alimentary and pharmacy processes
· Electrodes isolated with PTFE
· Process conn. Top screw. 1/4", 1/2", 3/4" or 1" G. SS AISI316
· Electrical connection: SS Connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum. 2 electrodes
NCPS TB INOX
· The common electrode is the process connection
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI TB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TB INOX
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TB INOX
· Electrodes isolated with PTFE
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
· Electrodes isolated with Polyolefine PE
· Process connection: Nipple. 1"1/2 G. PVC
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCVSC TB PVC
· Electrode holding: Twisted wire ø3 mm. SS AISI316 (1.4401).
· Process connection: Top screw. 1"1/2 G (PVC)
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCI
· Use in alimentary and pharmacy industries
· Connection to process: Clamp flange. 1". SS AISI316 (1.4401)
· Electrical Connection: Cable silicone
· Temperature: +100 ºC
· Pressure: 1 kg/cm²
· Protection: IP66
· Maximum 2 electrodes
NCPS DB INOX
· The common electrode is the process connection
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protección: IP66
· Maximum 3 electrodes
NCPSI DB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 3 electrodes
NCPS CB INOX
· The common electrode is the process connection
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI CB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS DB INOX
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (a 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI DB INOX
· Electrodes isolated with PTFE
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS CB INOX
· The common electrode is one of the rods
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI CB INOX
· Electrodes isolated with PTFE
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
· They are used to control conductive liquids in all types of reservoirs, wells, ponds, etc.
· The models differ by combinations of the following characteristics:
· Range of sensitivity.
· Modality of control.
· Quantity and type of output contacts.
-Technical data
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
+ Documentation
SNZA
· Data sheet
· Declaration of conformity CE
· Installation and application tips
· Safety, installation and maintenance instructions
+Ordering
· Determine the supply voltage that the relay will be connected to.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units conversor.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
NR 1 1/2
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NR 1 1/2 PG9
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: Cable 3 m
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRI 1 1/2 PG9
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1"1/2 G (PVC)
· Electrical connection: Cable 3 m (PVC)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NR 1 1/2 M12
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2 M12
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRA 1 1/2
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NRA 1 1/2 PG9
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRAI 1 1/2 PG9
· Electrodes isolated with PTFE. It can be used with alimentary products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRA 1 1/2 M12
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2 M12
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NCVS TP PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TC PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVS TC12 PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TP PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TC PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TC12 PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NRX 1
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NRXI 1
· Electrodes isolated with PTFE
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NT
· Electrode for independent level points
· Process connection: Nipple 1/4" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +140 ºC
· Pressure: 5 kg/cm²
NB
· Electrode holder for independent level points
· For tanks with pressure and temperature
· Process connection: Nipple 1/2" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +220 ºC
· Pressure: 20 bar
· The electrodes must be ordered separately (see [Accessories NB] at the end of this section)
NTM PVC
· Electrode for independent level points
· Fast height adjustment
· Process connection: Nipple 1/2", 3/4", 1" G. PVC, PTFE, PVDF
· Electrical connection: Terminal by screw
· Temperature: +60 ºC (PVC) / +140 ºC (PTFE/PVDF)
· Pressure: Atmosférica
· Protection: IP50
NRT2 PG9
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: PVC Cable, 3 meters
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NRT2 TC
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NTBI
· Used in alimentary and pharmacy processes
· Process conn.: Thread 1/4", 1/2", 3/4" or 1" G. SS AISI316 (1.4401)
· Electrical connection: SS connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum 2 electrodes
NTBII
· Used in alimentary and pharmacy processes
· Electrodes isolated with PTFE
· Process conn. Top screw. 1/4", 1/2", 3/4" or 1" G. SS AISI316
· Electrical connection: SS Connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum. 2 electrodes
NCPS TB INOX
· The common electrode is the process connection
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI TB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TB INOX
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TB INOX
· Electrodes isolated with PTFE
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
· Electrodes isolated with Polyolefine PE
· Process connection: Nipple. 1"1/2 G. PVC
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCVSC TB PVC
· Electrode holding: Twisted wire ø3 mm. SS AISI316 (1.4401).
· Process connection: Top screw. 1"1/2 G (PVC)
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCI
· Use in alimentary and pharmacy industries
· Connection to process: Clamp flange. 1". SS AISI316 (1.4401)
· Electrical Connection: Cable silicone
· Temperature: +100 ºC
· Pressure: 1 kg/cm²
· Protection: IP66
· Maximum 2 electrodes
NCPS DB INOX
· The common electrode is the process connection
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protección: IP66
· Maximum 3 electrodes
NCPSI DB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 3 electrodes
NCPS CB INOX
· The common electrode is the process connection
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI CB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS DB INOX
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (a 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI DB INOX
· Electrodes isolated with PTFE
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS CB INOX
· The common electrode is one of the rods
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI CB INOX
· Electrodes isolated with PTFE
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
· They are used to control conductive liquids in all types of reservoirs, wells, ponds, etc.
· The models differ by combinations of the following characteristics:
· Range of sensitivity.
· Modality of control.
· Quantity and type of output contacts.
-Technical data
PNFA - DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+ Documentation
PNFA - DNFA
· Data sheet
· Data sheet
· Declaration of conformity CE
· Declaration of conformity CE
· Installation and application tips
· Installation and application tips
· Safety, installation and maintenance instructions
· Safety, installation and maintenance instructions
+Ordering
· Determine the supply voltage that the relay will be connected to.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units conversor.
· For all options, see the table "Reference" in the technical documentation of the selected model.
· They are used to control conductive liquids in all types of reservoirs, wells, ponds, etc.
· The models differ by combinations of the following characteristics:
· Range of sensitivity.
· Modality of control.
· Quantity and type of output contacts.
-Technical data
PNCA - PNCB - DNCA - DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
+ Documentation
PNCA - DNCA - PNCB - DNCB
· Data sheet
· Data sheet
· Data sheet
· Data sheet
· Declaration of conformity CE
· Declaration of conformity CE
· Declaration of conformity CE
· Declaration of conformity CE
· Installation and application tips
· Installation and application tips
· Installation and application tips
· Installation and application tips
· Safety, installation and maintenance instructions
· Safety, installation and maintenance instructions
· Safety, installation and maintenance instructions
· Safety, installation and maintenance instructions
+Ordering
· Determine the supply voltage that the relay will be connected to.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units conversor.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
NR 1 1/2
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NR 1 1/2 PG9
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: Cable 3 m
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRI 1 1/2 PG9
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1"1/2 G (PVC)
· Electrical connection: Cable 3 m (PVC)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NR 1 1/2 M12
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2 M12
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRA 1 1/2
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NRA 1 1/2 PG9
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRAI 1 1/2 PG9
· Electrodes isolated with PTFE. It can be used with alimentary products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRA 1 1/2 M12
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2 M12
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NCVS TP PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TC PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVS TC12 PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TP PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TC PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TC12 PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NRX 1
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NRXI 1
· Electrodes isolated with PTFE
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NT
· Electrode for independent level points
· Process connection: Nipple 1/4" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +140 ºC
· Pressure: 5 kg/cm²
NB
· Electrode holder for independent level points
· For tanks with pressure and temperature
· Process connection: Nipple 1/2" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +220 ºC
· Pressure: 20 bar
· The electrodes must be ordered separately (see [Accessories NB] at the end of this section)
NTM PVC
· Electrode for independent level points
· Fast height adjustment
· Process connection: Nipple 1/2", 3/4", 1" G. PVC, PTFE, PVDF
· Electrical connection: Terminal by screw
· Temperature: +60 ºC (PVC) / +140 ºC (PTFE/PVDF)
· Pressure: Atmosférica
· Protection: IP50
NRT2 PG9
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: PVC Cable, 3 meters
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NRT2 TC
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NTBI
· Used in alimentary and pharmacy processes
· Process conn.: Thread 1/4", 1/2", 3/4" or 1" G. SS AISI316 (1.4401)
· Electrical connection: SS connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum 2 electrodes
NTBII
· Used in alimentary and pharmacy processes
· Electrodes isolated with PTFE
· Process conn. Top screw. 1/4", 1/2", 3/4" or 1" G. SS AISI316
· Electrical connection: SS Connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum. 2 electrodes
NCPS TB INOX
· The common electrode is the process connection
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI TB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TB INOX
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TB INOX
· Electrodes isolated with PTFE
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
· Electrodes isolated with Polyolefine PE
· Process connection: Nipple. 1"1/2 G. PVC
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCVSC TB PVC
· Electrode holding: Twisted wire ø3 mm. SS AISI316 (1.4401).
· Process connection: Top screw. 1"1/2 G (PVC)
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCI
· Use in alimentary and pharmacy industries
· Connection to process: Clamp flange. 1". SS AISI316 (1.4401)
· Electrical Connection: Cable silicone
· Temperature: +100 ºC
· Pressure: 1 kg/cm²
· Protection: IP66
· Maximum 2 electrodes
NCPS DB INOX
· The common electrode is the process connection
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protección: IP66
· Maximum 3 electrodes
NCPSI DB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 3 electrodes
NCPS CB INOX
· The common electrode is the process connection
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI CB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS DB INOX
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (a 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI DB INOX
· Electrodes isolated with PTFE
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS CB INOX
· The common electrode is one of the rods
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI CB INOX
· Electrodes isolated with PTFE
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
· They are used to control conductive liquids in all types of reservoirs, wells, ponds, etc.
· The models differ by combinations of the following characteristics:
· Range of sensitivity.
· Modality of control.
· Quantity and type of output contacts.
-Technical data
PNEA - DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
+ Documentation
PNEA - DNEA
· Data sheet
· Data sheet
· Declaration of conformity CE
· Declaration of conformity CE
· Installation and application tips
· Installation and application tips
· Safety, installation and maintenance instructions
· Safety, installation and maintenance instructions
+Ordering
· Determine the supply voltage that the relay will be connected to.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units conversor.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
NR 1 1/2
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NR 1 1/2 PG9
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: Cable 3 m
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRI 1 1/2 PG9
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1"1/2 G (PVC)
· Electrical connection: Cable 3 m (PVC)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NR 1 1/2 M12
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2 M12
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRA 1 1/2
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NRA 1 1/2 PG9
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRAI 1 1/2 PG9
· Electrodes isolated with PTFE. It can be used with alimentary products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRA 1 1/2 M12
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2 M12
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NCVS TP PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TC PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVS TC12 PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TP PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TC PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TC12 PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NRX 1
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NRXI 1
· Electrodes isolated with PTFE
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NT
· Electrode for independent level points
· Process connection: Nipple 1/4" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +140 ºC
· Pressure: 5 kg/cm²
NB
· Electrode holder for independent level points
· For tanks with pressure and temperature
· Process connection: Nipple 1/2" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +220 ºC
· Pressure: 20 bar
· The electrodes must be ordered separately (see [Accessories NB] at the end of this section)
NTM PVC
· Electrode for independent level points
· Fast height adjustment
· Process connection: Nipple 1/2", 3/4", 1" G. PVC, PTFE, PVDF
· Electrical connection: Terminal by screw
· Temperature: +60 ºC (PVC) / +140 ºC (PTFE/PVDF)
· Pressure: Atmosférica
· Protection: IP50
NRT2 PG9
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: PVC Cable, 3 meters
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NRT2 TC
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NTBI
· Used in alimentary and pharmacy processes
· Process conn.: Thread 1/4", 1/2", 3/4" or 1" G. SS AISI316 (1.4401)
· Electrical connection: SS connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum 2 electrodes
NTBII
· Used in alimentary and pharmacy processes
· Electrodes isolated with PTFE
· Process conn. Top screw. 1/4", 1/2", 3/4" or 1" G. SS AISI316
· Electrical connection: SS Connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum. 2 electrodes
NCPS TB INOX
· The common electrode is the process connection
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI TB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TB INOX
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TB INOX
· Electrodes isolated with PTFE
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
· Electrodes isolated with Polyolefine PE
· Process connection: Nipple. 1"1/2 G. PVC
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCVSC TB PVC
· Electrode holding: Twisted wire ø3 mm. SS AISI316 (1.4401).
· Process connection: Top screw. 1"1/2 G (PVC)
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCI
· Use in alimentary and pharmacy industries
· Connection to process: Clamp flange. 1". SS AISI316 (1.4401)
· Electrical Connection: Cable silicone
· Temperature: +100 ºC
· Pressure: 1 kg/cm²
· Protection: IP66
· Maximum 2 electrodes
NCPS DB INOX
· The common electrode is the process connection
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protección: IP66
· Maximum 3 electrodes
NCPSI DB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 3 electrodes
NCPS CB INOX
· The common electrode is the process connection
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI CB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS DB INOX
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (a 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI DB INOX
· Electrodes isolated with PTFE
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS CB INOX
· The common electrode is one of the rods
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI CB INOX
· Electrodes isolated with PTFE
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
· They are used to control conductive liquids in all types of reservoirs, wells, ponds, etc.
· The models differ by combinations of the following characteristics:
· Range of sensitivity.
· Modality of control.
· Quantity and type of output contacts.
-Technical data
PNDA - DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+ Documentation
PNDA - DNDA
· Data sheet
· Data sheet
· Installation and application tips
· Installation and application tips
· Well-Tank level control
· Well-Tank level control
· Schema: Well-tank control
· Schema: Well-tank control
· Declaration of conformity CE
· Declaration of conformity CE
· Safety, installation and maintenance instructions
· Safety, installation and maintenance instructions
+Ordering
· Determine the supply voltage that the relay will be connected to.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units conversor.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
NR 1 1/2
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NR 1 1/2 PG9
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: Cable 3 m
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRI 1 1/2 PG9
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1"1/2 G (PVC)
· Electrical connection: Cable 3 m (PVC)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NR 1 1/2 M12
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2 M12
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRA 1 1/2
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NRA 1 1/2 PG9
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRAI 1 1/2 PG9
· Electrodes isolated with PTFE. It can be used with alimentary products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRA 1 1/2 M12
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2 M12
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NCVS TP PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TC PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVS TC12 PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TP PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TC PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TC12 PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NRX 1
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NRXI 1
· Electrodes isolated with PTFE
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NT
· Electrode for independent level points
· Process connection: Nipple 1/4" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +140 ºC
· Pressure: 5 kg/cm²
NB
· Electrode holder for independent level points
· For tanks with pressure and temperature
· Process connection: Nipple 1/2" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +220 ºC
· Pressure: 20 bar
· The electrodes must be ordered separately (see [Accessories NB] at the end of this section)
NTM PVC
· Electrode for independent level points
· Fast height adjustment
· Process connection: Nipple 1/2", 3/4", 1" G. PVC, PTFE, PVDF
· Electrical connection: Terminal by screw
· Temperature: +60 ºC (PVC) / +140 ºC (PTFE/PVDF)
· Pressure: Atmosférica
· Protection: IP50
NRT2 PG9
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: PVC Cable, 3 meters
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NRT2 TC
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NTBI
· Used in alimentary and pharmacy processes
· Process conn.: Thread 1/4", 1/2", 3/4" or 1" G. SS AISI316 (1.4401)
· Electrical connection: SS connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum 2 electrodes
NTBII
· Used in alimentary and pharmacy processes
· Electrodes isolated with PTFE
· Process conn. Top screw. 1/4", 1/2", 3/4" or 1" G. SS AISI316
· Electrical connection: SS Connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum. 2 electrodes
NCPS TB INOX
· The common electrode is the process connection
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI TB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TB INOX
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TB INOX
· Electrodes isolated with PTFE
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
· Electrodes isolated with Polyolefine PE
· Process connection: Nipple. 1"1/2 G. PVC
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCVSC TB PVC
· Electrode holding: Twisted wire ø3 mm. SS AISI316 (1.4401).
· Process connection: Top screw. 1"1/2 G (PVC)
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCI
· Use in alimentary and pharmacy industries
· Connection to process: Clamp flange. 1". SS AISI316 (1.4401)
· Electrical Connection: Cable silicone
· Temperature: +100 ºC
· Pressure: 1 kg/cm²
· Protection: IP66
· Maximum 2 electrodes
NCPS DB INOX
· The common electrode is the process connection
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protección: IP66
· Maximum 3 electrodes
NCPSI DB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 3 electrodes
NCPS CB INOX
· The common electrode is the process connection
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI CB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS DB INOX
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (a 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI DB INOX
· Electrodes isolated with PTFE
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS CB INOX
· The common electrode is one of the rods
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI CB INOX
· Electrodes isolated with PTFE
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
· They are used to control conductive liquids in all types of reservoirs, wells, ponds, etc.
· The models differ by combinations of the following characteristics:
· Range of sensitivity.
· Modality of control.
· Quantity and type of output contacts.
-Technical data
PNGA - DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+ Documentation
PNGA - DNGA
· Data sheet
· Data sheet
· Declaration of conformity CE
· Declaration of conformity CE
· Safety, installation and maintenance instructions
· Installation and application tips
· Safety, installation and maintenance instructions
+Ordering
· Determine the supply voltage that the relay will be connected to.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units conversor.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
NR 1 1/2
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NR 1 1/2 PG9
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: Cable 3 m
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRI 1 1/2 PG9
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1"1/2 G (PVC)
· Electrical connection: Cable 3 m (PVC)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NR 1 1/2 M12
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2 M12
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRA 1 1/2
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NRA 1 1/2 PG9
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRAI 1 1/2 PG9
· Electrodes isolated with PTFE. It can be used with alimentary products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRA 1 1/2 M12
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2 M12
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NCVS TP PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TC PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVS TC12 PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TP PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TC PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TC12 PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NRX 1
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NRXI 1
· Electrodes isolated with PTFE
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NT
· Electrode for independent level points
· Process connection: Nipple 1/4" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +140 ºC
· Pressure: 5 kg/cm²
NB
· Electrode holder for independent level points
· For tanks with pressure and temperature
· Process connection: Nipple 1/2" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +220 ºC
· Pressure: 20 bar
· The electrodes must be ordered separately (see [Accessories NB] at the end of this section)
NTM PVC
· Electrode for independent level points
· Fast height adjustment
· Process connection: Nipple 1/2", 3/4", 1" G. PVC, PTFE, PVDF
· Electrical connection: Terminal by screw
· Temperature: +60 ºC (PVC) / +140 ºC (PTFE/PVDF)
· Pressure: Atmosférica
· Protection: IP50
NRT2 PG9
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: PVC Cable, 3 meters
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NRT2 TC
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NTBI
· Used in alimentary and pharmacy processes
· Process conn.: Thread 1/4", 1/2", 3/4" or 1" G. SS AISI316 (1.4401)
· Electrical connection: SS connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum 2 electrodes
NTBII
· Used in alimentary and pharmacy processes
· Electrodes isolated with PTFE
· Process conn. Top screw. 1/4", 1/2", 3/4" or 1" G. SS AISI316
· Electrical connection: SS Connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum. 2 electrodes
NCPS TB INOX
· The common electrode is the process connection
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI TB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TB INOX
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TB INOX
· Electrodes isolated with PTFE
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
· Electrodes isolated with Polyolefine PE
· Process connection: Nipple. 1"1/2 G. PVC
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCVSC TB PVC
· Electrode holding: Twisted wire ø3 mm. SS AISI316 (1.4401).
· Process connection: Top screw. 1"1/2 G (PVC)
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCI
· Use in alimentary and pharmacy industries
· Connection to process: Clamp flange. 1". SS AISI316 (1.4401)
· Electrical Connection: Cable silicone
· Temperature: +100 ºC
· Pressure: 1 kg/cm²
· Protection: IP66
· Maximum 2 electrodes
NCPS DB INOX
· The common electrode is the process connection
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protección: IP66
· Maximum 3 electrodes
NCPSI DB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 3 electrodes
NCPS CB INOX
· The common electrode is the process connection
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI CB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS DB INOX
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (a 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI DB INOX
· Electrodes isolated with PTFE
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS CB INOX
· The common electrode is one of the rods
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI CB INOX
· Electrodes isolated with PTFE
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
· They are used to control conductive liquids in all types of reservoirs, wells, ponds, etc.
· The models differ by combinations of the following characteristics:
· Range of sensitivity.
· Modality of control.
· Quantity and type of output contacts.
-Technical data
PNHA - DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+ Documentation
DNHA - PNHA
· Data sheet
· Data sheet
· Declaration of conformity CE
· Declaration of conformity CE
· Installation and application tips
· Installation and application tips
· Safety, installation and maintenance instructions
· Safety, installation and maintenance instructions
+Ordering
· Determine the supply voltage that the relay will be connected to.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units conversor.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
NR 1 1/2
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NR 1 1/2 PG9
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: Cable 3 m
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRI 1 1/2 PG9
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1"1/2 G (PVC)
· Electrical connection: Cable 3 m (PVC)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NR 1 1/2 M12
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2 M12
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRA 1 1/2
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NRA 1 1/2 PG9
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRAI 1 1/2 PG9
· Electrodes isolated with PTFE. It can be used with alimentary products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRA 1 1/2 M12
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2 M12
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NCVS TP PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TC PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVS TC12 PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TP PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TC PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TC12 PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NRX 1
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NRXI 1
· Electrodes isolated with PTFE
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NT
· Electrode for independent level points
· Process connection: Nipple 1/4" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +140 ºC
· Pressure: 5 kg/cm²
NB
· Electrode holder for independent level points
· For tanks with pressure and temperature
· Process connection: Nipple 1/2" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +220 ºC
· Pressure: 20 bar
· The electrodes must be ordered separately (see [Accessories NB] at the end of this section)
NTM PVC
· Electrode for independent level points
· Fast height adjustment
· Process connection: Nipple 1/2", 3/4", 1" G. PVC, PTFE, PVDF
· Electrical connection: Terminal by screw
· Temperature: +60 ºC (PVC) / +140 ºC (PTFE/PVDF)
· Pressure: Atmosférica
· Protection: IP50
NRT2 PG9
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: PVC Cable, 3 meters
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NRT2 TC
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NTBI
· Used in alimentary and pharmacy processes
· Process conn.: Thread 1/4", 1/2", 3/4" or 1" G. SS AISI316 (1.4401)
· Electrical connection: SS connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum 2 electrodes
NTBII
· Used in alimentary and pharmacy processes
· Electrodes isolated with PTFE
· Process conn. Top screw. 1/4", 1/2", 3/4" or 1" G. SS AISI316
· Electrical connection: SS Connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum. 2 electrodes
NCPS TB INOX
· The common electrode is the process connection
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI TB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TB INOX
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TB INOX
· Electrodes isolated with PTFE
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
· Electrodes isolated with Polyolefine PE
· Process connection: Nipple. 1"1/2 G. PVC
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCVSC TB PVC
· Electrode holding: Twisted wire ø3 mm. SS AISI316 (1.4401).
· Process connection: Top screw. 1"1/2 G (PVC)
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCI
· Use in alimentary and pharmacy industries
· Connection to process: Clamp flange. 1". SS AISI316 (1.4401)
· Electrical Connection: Cable silicone
· Temperature: +100 ºC
· Pressure: 1 kg/cm²
· Protection: IP66
· Maximum 2 electrodes
NCPS DB INOX
· The common electrode is the process connection
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protección: IP66
· Maximum 3 electrodes
NCPSI DB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 3 electrodes
NCPS CB INOX
· The common electrode is the process connection
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI CB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS DB INOX
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (a 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI DB INOX
· Electrodes isolated with PTFE
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS CB INOX
· The common electrode is one of the rods
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI CB INOX
· Electrodes isolated with PTFE
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
· They are used to control conductive liquids in all types of reservoirs, wells, ponds, etc.
· The models differ by combinations of the following characteristics:
· Range of sensitivity.
· Modality of control.
· Quantity and type of output contacts.
-Technical data
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+ Documentation
MNZA
· Data sheet
· Declaration of conformity CE
+Ordering
· Determine the supply voltage that the relay will be connected to.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units conversor.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Related products
NR 1 1/2
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NR 1 1/2 PG9
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: Cable 3 m
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRI 1 1/2 PG9
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1"1/2 G (PVC)
· Electrical connection: Cable 3 m (PVC)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NR 1 1/2 M12
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRI 1 1/2 M12
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRA 1 1/2
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NRA 1 1/2 PG9
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRAI 1 1/2 PG9
· Electrodes isolated with PTFE. It can be used with alimentary products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
NRA 1 1/2 M12
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
NRAI 1 1/2 M12
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
NCVS TP PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TC PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVS TC12 PP
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TP PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TC PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NCVSI TC12 PP
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
NRX 1
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NRXI 1
· Electrodes isolated with PTFE
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
NT
· Electrode for independent level points
· Process connection: Nipple 1/4" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +140 ºC
· Pressure: 5 kg/cm²
NB
· Electrode holder for independent level points
· For tanks with pressure and temperature
· Process connection: Nipple 1/2" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +220 ºC
· Pressure: 20 bar
· The electrodes must be ordered separately (see [Accessories NB] at the end of this section)
NTM PVC
· Electrode for independent level points
· Fast height adjustment
· Process connection: Nipple 1/2", 3/4", 1" G. PVC, PTFE, PVDF
· Electrical connection: Terminal by screw
· Temperature: +60 ºC (PVC) / +140 ºC (PTFE/PVDF)
· Pressure: Atmosférica
· Protection: IP50
NRT2 PG9
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: PVC Cable, 3 meters
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NRT2 TC
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
NTBI
· Used in alimentary and pharmacy processes
· Process conn.: Thread 1/4", 1/2", 3/4" or 1" G. SS AISI316 (1.4401)
· Electrical connection: SS connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum 2 electrodes
NTBII
· Used in alimentary and pharmacy processes
· Electrodes isolated with PTFE
· Process conn. Top screw. 1/4", 1/2", 3/4" or 1" G. SS AISI316
· Electrical connection: SS Connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum. 2 electrodes
NCPS TB INOX
· The common electrode is the process connection
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI TB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS TB INOX
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI TB INOX
· Electrodes isolated with PTFE
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
· Electrodes isolated with Polyolefine PE
· Process connection: Nipple. 1"1/2 G. PVC
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCVSC TB PVC
· Electrode holding: Twisted wire ø3 mm. SS AISI316 (1.4401).
· Process connection: Top screw. 1"1/2 G (PVC)
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
NCI
· Use in alimentary and pharmacy industries
· Connection to process: Clamp flange. 1". SS AISI316 (1.4401)
· Electrical Connection: Cable silicone
· Temperature: +100 ºC
· Pressure: 1 kg/cm²
· Protection: IP66
· Maximum 2 electrodes
NCPS DB INOX
· The common electrode is the process connection
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protección: IP66
· Maximum 3 electrodes
NCPSI DB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Flange. DN25. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 3 electrodes
NCPS CB INOX
· The common electrode is the process connection
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCPSI CB INOX
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Clamp flange. 2" G. SS AISI316 (1.4401)
· Electrical connection: PBT housing
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS DB INOX
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (a 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI DB INOX
· Electrodes isolated with PTFE
· Process connection: Flange DN25. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVS CB INOX
· The common electrode is one of the rods
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
NCVSI CB INOX
· Electrodes isolated with PTFE
· Process connection: Clamp flange 2" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
