· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
· Electrodes made of SS AISI316 (1.4401)
· The electrodes can be cut to adjust the desired level point
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
Cable (m)
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: Cable 3 m
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
Cable (m)
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1"1/2 G (PVC)
· Electrical connection: Cable 3 m (PVC)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (20 ºC)
· Protection: IP66
· Maximum 5 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw PVC 1"1/2 G
· Electrical connection: M12 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP65
· Maximum 4 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: DIN43650 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
Covering
PTFE
Cable (m)
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
Cable (m)
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with PTFE. It can be used with alimentary products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: Cable 3 m (Silicone)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 5 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (20 ºC)
· Protection: IP65
· Maximum 4 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with PTFE. It can be used with alimentary and pharmaceutical products
· Process connection: Top screw 1"1/2 G (PTFE)
· Electrical connection: M12 connector
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 4 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"G
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
Cable (m)
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"G
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"G
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"G
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
Cable (m)
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: PVC cable (3 meters)
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"G
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector DIN43650
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"G
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with Polyolefine PE
· Process connection: Top screw 1" G (PP)
· Electrical connection: connector M12
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP65
· Maximum 3 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
Cable (m)
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
Cable (m)
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with PTFE
· Process connection: Top screw. 1" G. SS AISI316 (1.4401)
· Electrical connection: Silicone cable (1 meter)
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20 ºC)
· Protection: IP66
· Maximum 2 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
Number of electrodes
1
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrode for independent level points
· Process connection: Nipple 1/4" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +140 ºC
· Pressure: 5 kg/cm²
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
Number of electrodes
1
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrode holder for independent level points
· For tanks with pressure and temperature
· Process connection: Nipple 1/2" G. SS AISI316 (1.4401)
· Electrical connection: Terminal by screw
· Temperature: +220 ºC
· Pressure: 20 bar
· The electrodes must be ordered separately (see [Accessories NB] at the end of this section)
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Length (mm)
All electrodes are delivered at the same length
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: DIN43650 connector
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Number of electrodes
1
Process connecion
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrode for independent level points
· Fast height adjustment
· Process connection: Nipple 1/2", 3/4", 1" G. PVC, PTFE, PVDF
· Electrical connection: Terminal by screw
· Temperature: +60 ºC (PVC) / +140 ºC (PTFE/PVDF)
· Pressure: Atmosférica
· Protection: IP50
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Length (mm)
All electrodes are delivered at the same length
Cable (m)
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrode for liquid detection in pipes
· Electrode material: SS AISI316 (1.4401)
· Process connection: Top screw. 1/2´´ G (PVC)
· Electrical connection: PVC Cable, 3 meters
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP50
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Used in alimentary and pharmacy processes
· Process conn.: Thread 1/4", 1/2", 3/4" or 1" G. SS AISI316 (1.4401)
· Electrical connection: SS connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum 2 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· Archivo 3D [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Used in alimentary and pharmacy processes
· Electrodes isolated with PTFE
· Process conn. Top screw. 1/4", 1/2", 3/4" or 1" G. SS AISI316
· Electrical connection: SS Connection housing
· Temperature: +100 ºC
· Pressure: Atmospherical
· Protection: IP67
· Maximum. 2 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"G
Number of electrodes
Length (mm)
1000
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· The common electrode is the process connection
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (at 20 ºC)
· Protection: IP67
· Maximum 3 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"G
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· The common electrode is the process connection
· Electrodes isolated with PTFE
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"G
Number of electrodes
Length (mm)
1000
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Process connection: Nipple 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 5 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Module for RS485 output
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"G
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with PTFE
· Process connection: Nipple. 1" G. SS AISI316 (1.4401)
· Electrical connection: Connection housing. PBT
· Temperature: +100 ºC
· Pressure: 1 kg/cm² (to 20ºC)
· Protection: IP67
· Maximum 3 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Module for RS485 output
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"1/2G
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"1/2G
Number of electrodes
Length (mm)
All electrodes are delivered at the same length
Electrodes material
SS
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrodes isolated with Polyolefine PE
· Process connection: Nipple. 1"1/2 G. PVC
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Module for RS485 output
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
+
CONFIGURATOR:
Process connecion
1"1/2G
Number of electrodes
Cable length (m)
Indicate the total sum of the cable length of all the electrodes.
Cable composition
SS/PVC
Wire in stainless steel and PVC coating.
It remains to be decided
Select a product to display its configuration data
Reference
aaaa
CodeWeight (kg)Dimensions (mm)
Delivery time
The delivery time is expressed in working days. It... [Know more]
· Exclusive use in conductive liquids, are used to control level points both independent or combined into small tanks or in deep wells
· Need to connect to a standard relay for conductive liquids
· The number of electrodes is determined by the function of the chosen relay
-Technical data
· Electrode holding: Twisted wire ø3 mm. SS AISI316 (1.4401).
· Process connection: Top screw. 1"1/2 G (PVC)
· Electrical connection: Connection housing. PBT
· Temperature: +70 ºC
· Pressure: 5 kg/cm² (to 20 ºC)
· Protection: IP67
· Maximum 5 electrodes
+ Documentation
· Data sheet
· Installation and application tips
· Module for RS485 output
· Declaration of conformity CE
· 3D file [.ZIP]
+Ordering
· Choose the type of process connection and electrical connection that best fits your installation.
· Check that the conditions of pressure and temperature of the installation match with the ones allowed by the model chosen.
· To know the relationship between the electric resistance and the conductivity of the liquid to be controlled, use the Units converter.
· If you have questions about the chemical behavior of materials in contact with the liquid you want to operate, refer to Table of chemical resistance.
· For all options, see the table "Reference" in the technical documentation of the selected model.
+Table of chemical resistance
Substance
Other names
+Convertisseur de conductivité
Quantity
Unit
Decimals
Ω
1000000,000
KΩ
1000,000
MΩ
1,000
µSiemens
1,000
mSiemens
0,001
Siemens
0,000
+Related products
PNSA -DNSA -SNSA
· Maximum and/or minimum level control
· General application
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNFA -DNFA
· Combined control of phase failure and maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNCA -PNCB -DNCA -DNCB
· Supply voltage DC or AC
· Double relay contact
· Maximum and/or minimum level control
· Sensitivity: 8..45 Kohms
· Voltage/Current (probes): 6,2 VCA/3,2 mA
PNEA -DNEA
· For high resistivity liquids: destlled waters, demineralized...
· Maximum and/or minimum level
· Two sensitivity ranges: 10..100 Kohms / 200 Kohms..4,7 Mohms
· Voltage/Current (probes): 24 VAC/4 mA
PNDA -DNDA
· Automatic control for well and tank
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNGA -DNGA
· Double level control
· Two independent level controls
· Contacts NO
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
PNHA -DNHA
· Double level control
· Two independent level controls
· Contacts NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNDA
· Two independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 24 VAC/4 mA
SNZA
· Control of 3 independent levels, belonging to the same tank or not
· Several application possibilities
· Independent adjustments for each relay
· Function Max-Min or Set-Point
· Delay at level detection: 0..10s
· Sensitivity: 10..100Kohms
· Voltage/Current (probes): 5 VCA/4 mA
MNZA
· Three independent level controls
· Contacts NO/NC
· Maximum and/or minimum level
· Without housing. Directa assembly to DIN rail
· Sensitivity: 10..150 Kohms
· Voltage/Current (probes): 24 VAC/4 mA
